Syncing time to a Wavestore using NTP

If desired to synchronise time of other devices by using the Wavestore as an NTP server, this is easy; Wavestore Servers always offer NTP.

Just set up the client (eg, camera) to sync to the Wavestore by giving the Wavestore IP address as NTP time source.

We do not recommend setting up camera devices to sync time to the Wavestore. The problem is that some cameras "jump" the time because they are using SNTP rather than proper NTP, and this might cause problems when the time on the camera appears to jump about. But the Wavestore doesn't use this time (it applies server time) so it should be ok.

 

Syncing a Wavestore to another NTP time source

You can set up the Wavestore to sync to an NTP time source (another Wavestore or another NTP server) using the NTP setup screen accessible via the WaveView setup menus.

The Wavestore time sync method never jumps the time, it slews it slowly if it's wrong. As a result any time difference of more than 20 minutes cannot be corrected using NTP alone, and should be manually entered and the system rebooted. See also How to force time to jump backwards Usually if there's a difference of more than 20 minutes it indicates you have made a mistake - for example you have not set the correct time zone.