Axis Camera and ONVIF user creation

As per Axis documentation, VAPIX and ONVIF interfaces have been disabled and the root user’s password is no longer set in factory default state when shipped from production. This means that it is no longer possible for a client to access or configure the device out-of-the-box without activating VAPIX or ONVIF first. The new access procedure has been implemented in the following AXIS OS major platform releases:

  • Firmware 5.51.6
  • Firmware 6.50.4 (2016 LTS)
  • Firmware 8.40.3 (2018 LTS)
  • Firmware 9.40.1 and higher (ACTIVE Track)

Furthermore, the new access procedure has been rolled out in new firmwares on individual product releases that are located outside of the above major platform releases, such as:

  • Firmware 1.65.x
  • Firmware 1.8x.x
  • Firmware 5.75.x
  • Firmware 6.53.x
  • Firmware 6.55.x
  • Firmware 7.15.x

 From Wavestore V6.20 onwards, when an Axis camera is added with CameraGroup Type as “Auto”, it enables Axis-Vapix as well as creates ONVIF user with the same credentials entered in the CameraGroup settings. It also enables Audio support (if available on the camera).

Note: This automatic Vapix and ONVIF activation is available only with Type “Auto”. If using type “ONVIF”, ONVIF user will have to be created manually via camera web GUI.