Setting up Audio Alert on Event with Axis P8221

Waveview


1. Create 2 I/O devices on WaveView: one as VAPIX and enter the username, password and IP address for the device then the second i/o device should be a virtual input and uncheck the output box.

image

image

2. Next create an event rule with the cause as input and select the virtual input device you created. The trigger should be the VAPIX device then save.

image


 

Axis P8221 GUI


1. When logged into the Axis P8221 web page click on Setup at the top of the screen and navigate Events>Event Types which is on the left hand side.

image


2. Next Click on “Add Triggered” and there should be a pop out window which opens.

3. Under "Triggered by" select “Input ports” from the drop-down box. After you select “input ports” 4 input devices should show up and under “Input 1” select “active”.

image

4. Under “When Triggered” check the box that says, “Play audio clip” and select a sound in this case we selected camera clicks.
image

Now when you head back to Waveview and play the event rule you will get the audio clip playing through the device.