AutoLogin "ThisClient" (Server/Local Client)

The Waveview client allows you to set up an auto-login to a specific Wavestore server with a set username and password


The configuration added to the server will look like this:

[ThisClient_1]
NumInstances=1
ExtraOptions1=--screen=0 --output=DP1 --autoLogin=192.168.200.2,user,a --fullscreen --maximize

The highlighted parts are the ones we need to change depending on IP address, user, password and monitor output connected.

On the server itself, with a monitor, keyboard and mouse connected, we ll need to run a command.

Tools > Execute command...

Run: axrandr

This will display the monitor output, and will look something like this:

Screen 0: minimum 8 x 8, current 1024 x 768, maximum 16384 x 16384
VGA-0 disconnected primary (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 256mm x 192mm
1024x768 60.00*+
1920x1080 60.00 59.94 
1440x900 59.89 
1360x768 60.02 
1280x1024 60.02 
1280x960 60.00 
1280x800 59.81 
1280x720 59.94 
720x480 59.94 59.94 

In the example above, we can see that "VGA-0" is disconnected, "DVI-D-0" is disconnected, but "HDMI-0" is connected. So, in the configuration earlier, we would replace "DP1" with "HDMI-0".

We would also need to replace the IP address, the username and the password with whatever is set to the server.

After this is done, we can create layouts on the user account.