What are the storage limitations on Wavestore?

In version 5:

  • Up to 26 volumes per Wavestore - where a volume is usually a disk, a partition on a disk, or a RAID array of multiple disks.
  • Up to 589,000,000 images per volume - that's approximately 273 days at 25 images per second.
  • 20 TebiBytes per volume (Note: a TebiByte is approximately 1.1 TeraBytes).
  • 128 recording tracks per volume.

In version 6:

  • Up to 26 volumes per Wavestore - where a volume is usually a disk, a partition on a disk, or a RAID array of multiple disks.
  • Up to 16 trillion images per volume - that's approximately 7.4 million days at 25 images per second, or the equivalent of 254 cameras for 80 years at 25 images per second!
  • Up to 16 PetaBytes per volume.
  • Up to 511 recording tracks per volume.
  • Up to 60 data disks and up to 5 redundant disks in each RAID group (60+5), so up to 5 disks can fail without loss of data.
  • Up to 30 RAID groups in a single volume. All but one can be spun down to save power; one is kept spun up for current recording.
  • Up to 250 disk drives total in a single volume, although the practical maximum is 204 disks in a single Wavestore unit.
  • Each image up to 16MB (an arbitrary limit to prevent very large corrupt images causing problems).

Figures for data disks, redundant disks and RAID groups assume V6.14 or later (with EcoStore + HyperRAID licence) and apply to all Wavestore units of any type, subject to the maximum number of disks being limited by physical limits. If using a different RAID technology then different limits will apply (depending on the supplier of the RAID card or system).