Restreaming Video and Audio from a Wavestore

It is possible to restream video and/or audio from one Wavestore to another Wavestore or other third party device using RTSP.

To set up:

  • Ensure the source Wavestore, from which you want to restream, has the RTSP Server enabled (it's under the ONVIF configuration section).

And then set up the target device:

  • Configure the target Wavestore to pull relevant streams using RTSP using Wavestore request string in a Camera Group.
  • You can specify a subunit number on the camera setup table to choose the source camera on the source Wavestore for each camera.
  • One CameraGroup will usually be sufficient for all video streams. If desired you can also pull secondary streams as well by configuring Stream 2 and using the Wavestore secondary stream request string in the same camera group.
  • Another CameraGroup will be needed for audio-only streams, with video disabled and audio enabled in the configuration.

As of V6.24 most video types can be restreamed, including H264, H265, JPEG and MxPEG.

Uncompressed audio can also be restreamed, but not all audio streams can be restreamed at the current time.