RAID Disk Order
Disk Slot Order or RAID Disk Order:
Wavestore Systems number the disk slots from 1, and order them from left to right then top to bottom just like words on a page. This is true for HyperRAID and for most MegaRAID systems, as well as single disks. Usually they will be denoted with 's' prefix (for disk slot):
s01 s02 s03 s04 s05 s06 s07 s08
For systems with only one column of disks they are numbered from top to bottom.
If Wavestore software has been installed on non-standard hardware, the check with the supplier of hardware for details of the disk ordering, but the reports from the Wavestore software will number the disks from 1 (not 0) in all cases.
Note that numbering like Disk D1 D2 is the logical numbering within Disk Array D, and although this might be identical to the physical slot numbering (if there is only one array and it was created with disks in all slots), this will not be true on more complex setups.
It is possible to remove all the disks and put them back in another order and the logical numbering will be retained (so all data is retained) even if the slot number which that disk is in has changed. So do check the slot number before removing a disk!
If your disks do not have slot numbers, but have names like sda sdb, then there will be no correspondence between the names and the slots. You will usually find the system drive has a name like this because it is not in an external slot. Some systems with only internal drives will not have slot numbers.