Factory Default for Wavestore Vision WV2 cameras
If you need to erase old settings on a Wavestore Vision WV2 camera, it is possible to reset settings to the factory default. This can be performed from the UI or by clicking a hidden button on the camera.
There are two variants:
- Soft Factory Default which resets everything except the Network details (IP, subnet, gateway).
- Hard Factory default which resets everything (including the network details).
In both cases the password is reset. A new password can be set on first login to the camera on the camera web page. If it prompts for a username and password on first login, use username root and password pass.
After a hard reset, the network address will be set by DHCP if a DHCP server is available, otherwise it will default to 192.168.0.120. Logging into the camera web page will allow the IP address to be reset.
The addresses which Wavestore Vision WV2 cameras are currently on can be discovered using a discovery tool. WaveView provides a discovery function, and so does the WV2 IP camera tool (contact technical support if you need this).
Reset to Factory Default can be performed over the network using various tools, but this requires knowledge of the password and IP address. One method is to log into the camera webpage and select Settings > System > Maintenance > Restore.
To perform a Hard Reset to Factory Default using a physical button on the camera: unscrew the cover on the camera (different models have a cover in different places, but it should be fairly obvious) and press the button for 5 seconds while the camera is powered up. The network lights will stop flashing for a second during the reset, so you know it has succeeded. All settings will be reset including network and password.