Changing Server Clock (software versions V6.12 -> V6.18)
Login to the server as an install level user, then click on the View menu, and select Setup:
In the Setup menu, click on the Time & Region icon:
To change the time or date, enter the new details required, then click ‘Set Time’:
For a small change of a few minutes (+/- 30 minutes), the server clock will slew to the new configured time over the next few hours as shown by the message that appears:
For a large change > 30 minutes, a Warning message will appear:
Close the Warning message that appears, and follow the menu path Tools -> Execute Command:
To move the time forward immediately, enter:
jumptime
Then click Run:
To move the clock backwards, enter:
jumptimeback-delete
Then click Run:
The clock will change to the time that you’ve set:
The server will have entered ‘Fault’ state as changing the server clock isn’t considered as normal operation (status icon changes from Green to Red). To clear this fault, follow the menu path Tools -> System Log:
In the System Log window that opens, click on ‘Clear Fault’:
Close the log window and return to the Main screen. The status indicator will now show Green now the fault has been cleared. If desired, you can enter the IP address of an NTP server to synchronise the server clock to, then click Save: